Pianos regularly make movers annual list of items that are most frequently harmed. Grand pianos are particularly troublesome. Practicing the following procedures for disassembling, cushioning and packing grand pianos will prevent damage, lower claims cost, and improve customer satisfaction.
1) A minimum of three individuals are needed to handle a child grand piano. If the baby grand piano needs to increase or down stairs or if a full or concert grand piano requires to be transported, a minimum of 4 people are required.
2) Constantly complete a thorough and accurate inventory. It may be more effective or required to utilize a visual stock to adequately describe and show pre-existing damage.
3) As different parts are disassembled, please place all hardware in an effectively identified parts bag and then put the parts bag in a "Parts Box".
4) Eliminate the music rack (lyre) from its track by pulling it toward the keyboard. Wrap it in a clean furniture pad.
5) Detach the cover by eliminating the hinge pins. Wrap the lid in a tidy furnishings pad.
6) Eliminate the prop that holds the cover open and cover it in a clean furniture pad. The prop has a hinge pin and remains in two pieces.
7) Remove the pedal assembly and cover it in a clean furniture pad. The braces at the back of the assembly rest in slots at each end. When eliminating the screws, please beware not to drop the braces. In addition, please be specifically cautious with the push-rods so that they will not get bent. As you face the piano, number the push-rods from left to right as "1", "2", and "3", by putting a piece of masking tape with the appropriate number on each rod. Keep in mind: If masking tape is unavailable, please usage correctly identified parts bags for this function. When reassembling at location, please make sure to put the rods in the correct order so that the pedals will work appropriately.
8) Pad the piano by positioning a tidy rolled furnishings pad (stretch-wrap the pad to avoid it from unrolling) on the cover of the keyboard to prevent it from flopping open while you handle the piano. Note: Please ensure that the surface of the piano is dust-free before padding it.
9) Position a piano board and connect the straps so that it is all set to receive the piano. The raised brace on the piano board should be at the keyboard end of the piano.
10) Remove the left front leg by placing a single person beneath the piano at the left end of the keyboard. The other two people need to support the left front corner. The person beneath the piano must turn the retaining block so that the long end points far from the leg. The screws, if there are any, must then be eliminated. The "underneath" individual ought to then extricate the piano before in fact eliminating the leg. Be sure to have two individuals lifting the corner of the piano while the third person removes the leg. Keep in mind: Please make sure to keep in mind which legs were gotten rid of from which positions given that some pianos have legs that are not interchangeable.
11) Place the piano on the piano board by lowering the "leg-less" end onto the board. Please be sure to lift the whole piano slightly while completing this maneuver to prevent excessive pressure on the remaining, attached legs as the piano suggestions. Raise the piano to an upright position on the board. Note: Please guarantee that the soundboard is protected prior to lifting. Make certain that the piano is centered snugly against the brace at the end of the piano board. Note: Never leave the piano unattended. Always have at least a single person holding the piano steady at all times.
12) Remove the 2 staying legs and cover them in tidy furnishings pads. These legs are kept in location by a "key and slot" arrangement. To remove the leg, slide it inward toward the center of the piano until it comes out of the slot.
13) Protect the piano to the piano board by bringing the ends of the straps together and fastening them. Location folded burlap pads over the furnishings pads however under the straps to provide additional defense to the edges of the piano. To prevent the strap near the narrow end of the piano from slipping off, tie the loose ends of the two straps together.
14) To move the piano over a flat, level surface area, tilt the piano and piano board and place a four-wheel dolly under the center of the piano board.
15) To move the piano up or down stairs, utilize the piano board as a skid. After adequately padding the stairs for security against house damage, put the keyboard end of a fantastic read the piano toward the bottom of the stairs. Attach a bulge strap to the top end of the piano board to avoid the piano from slipping.
16) To load the piano, leave it on the piano board and place it in a tier as the very first base item with the keyboard dealing with the wall of the preceding tier. The very best place to pack the padded lid is in between the piano and the preceding tier or between the wall and the piano.
Grand pianos represent a substantial obstacle, they can be moved without damage by using typical sense and practicing the treatments listed above.